Click on the image to check the artwork
By certification 
Electric actuator type:
1)Standard On/Off switch type
Valves ON/OFF is conducted by switch circuit with outputting active contact signal which can show a fully open or fully close state of the valves.
2)Passive contact type
Valves ON/OFF is conducted by switch circuit with outputting passive contact signal which can show a fully open or fully close state of the valves.
3)Position signal type
The opening or closing operation is realized by switching “open” or “close” the circuit, outputting the relative group of open or close degree current signals.
4)Opening degree signal type
The opening angle of valves is controlled by switch circuit,with potentionmeter outputting resistance signal corresponding valves opening angle.
5)Intelligent adjust 4-20mA type:
Intelligent regulation and control are conducted by receiving the standard signal 4-20mA.DC,0-10V or 1-5V outputted by computers of instruments standard feedback signal 4-20mA.DC is also outputted.
Production Description:
Body Material: |
AISI 304 or 316L |
Gasket Material: |
Silicone,EPDM,VITON,NBR,which all comply with FDA177.2600 |
Power Operation: |
DC24V,AC110V,AC220-240V,380-420V;50/60HZ |
Standard: |
3A,SMS,DIN,ISO,IDF,RJT |
Size: |
DN15/1/2” to DN300/12” |
Connection End: |
Tri clamp ,Weld,Thread,Flange or as customized |
Max Pressure: |
10bar(DN25/100),8bar(DN125/150) |
Working Temperature: |
-10deg C to +120deg C(EPDM) |
Surface Finishing: |
Ra≤0.8um |
Production Details:
Company Information:
http://www.kinggovalves.com/
